BMW F650 Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 · (Edited)
i have a 97' funduro, i need a longer air screw for both my Mikuni BST 36 mm carbs. the oem one is too hard to reach.

i've been looking around the internet but i wasn't able to find one. so if someone can point me to where i can buy one that'd be great!


possibly with a knob that can be turned by hand like the OEM idle speed adjuster

38194
38195


i found this screw but they don't say if it fist for this care, can someone with the carbs out check the measurements and see if it will work? i don't wanna pull the carbs just to check this it's such pain, hoping someone has their carbs out so they can check....
 

·
Registered
Joined
·
873 Posts
I never had a problem , has an index mark on the knob you turn so you just back it out however many turns you want and then tweak for best running , used mine on loads of different makes models an multi cylinder bikes no issue. They are a great tool just make sure it is a decent one.
 
1 - 9 of 9 Posts
Top