BMW F650 Forums banner
torque
1-15 of 15 Results
  1. F650 Single Discussion
    Rear wheel nut Torque settings........ My Haynes manual says Funduro, ST, Dakkar and GS - rear wheel torque should be 100 Nm BUT on the CS it should be 160 Nm. That sounds a lot especially as the supplied plastic socket is, well, plastic! Can anyone confirm the correct Torque setting for...
  2. F650 Single Discussion
    Hi all, I have just received a rear brake master cylinder heel guard and was wondering if the bolts that hold it in place have a torque setting or are they just FT ( if you know what i mean). If they have a torque setting does anybody know what it is and in either case would you advise use of...
  3. Bike Tech / Kit / Reviews
    Hi does anyone happen to know the torque settings for the rear wheel spindle and the front spindle pls.Putting new tyres on and can`t find my haynes !!!:wall:
  4. F650 Single Discussion
    Having succesfully replaced the fork seals (2004 Dakar) I proudly replaced the front whell and after carefully checking my BMW workshop manual (GS version on CD) I torqued the axle up to 80Nm. Great job done I thought until I noticed on the chain gang forum that they list the GS and Dakar at 40...
  5. F650 Single Discussion
    Can anybody recommend a 1/2 drive torque wrench for working on the CS my old one is too rusty to be serviceable. :oops: Cheers John
  6. F650 Single Discussion
    Another pls..............41nM yes or no? Thanks
  7. F650 Single Discussion
    Just put the TT low mudguard on and can't remember the torque settings for the brace bolts..............set it @ 26nM Yes or No?
  8. F650 Single Discussion
    Hi, inspired by the recent thread about torque wrenches I got thinking. I'm a bit (to say the least) confused about the torque values which are spcified by BMW in the manual about various nuts and bolts. As far as I understand the toppic, there are a number of things a screw could be used for...
  9. F650 Single Discussion
    Having checked my chain, it needs a little tightening. I can see how to do it, and have even bought a new 24mm socket for the wheel nut. But then I thought....the manual keeps on about the torque setting when re-tightening nuts. I haven't got and don't want to buy a torque wrench. Anyone got...
  10. F650 Single Discussion
    Anybody with a BMW manual tell me the following in nM Swing Arm Pivot Bolt & Nut Suspension Linkage Bolt that attaches to Swing Arm Front Fork Brace Bolts Rear Sprocket Bolts and Nuts (& what size are nuts.......look like M8's nyloc) Thanks chaps (or chapesses)
  11. F650 Single Discussion
    Can anyone tell me the correct torque wrench setting for rear whelel nut on f650st another ride another puncture :wall: needed to be recovered this time so off for another new innertube tomorrrow.
  12. F650 Single Discussion
    hi Does anyone know of torque wrench(one of(only one of)) that covers torque settings of F650gs nuts,screws and bolts? thanks`n` :cheers:
  13. F650 Single Discussion
    Hi all Can any one recommend a set of torque wrenches suitable for use on F650gs, price and source please ? Also, how often are you having to adjust chain? of course riding style and lubrication have effect :cheers:
  14. Useful website references
    Torque tables for the F650 models (Not F650GS) http://faq.f650.com/FAQs/F650_Torque_Table.htm
  15. F650 Single Discussion
    Has anyone done an oil change without a torque wrench?? i have ordered all the gaskets etc and filters for the change getting castrol gp 10w/40 motorcycle oil (mineral) as recomended by two bmw garages.... so the torque is all im missing, they cost a pretty penny so im thinking i could do it...
1-15 of 15 Results
Top