BMW F650 Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-5 of 5 Results
  1. F650 Single Discussion
    :confused: Hi all My Funduro winter service/overhaul continues...i have just removed the swinging arm and linkage to check/clean and lubricate, Regarding the plastic washers that go between the swing arm and the frame...is there meant to be one or two? on removing mine there is only one fitted...
  2. F650 Single Discussion
    Can anybody tell me if its possible to replace the plastic slider without removing the swinging arm. Its worn right through underneath and is hanging down resulting [we hope] in the mysterious noise from down there. We think the chian is flicking it up against the swinging arm. Dont want to take...
  3. F650 Single Discussion
    After helping a mate of mine with greasing his linkages and s/arm bearings i was surprised to see how bad his were.Ok so his is a 01 Gs with 16000 miles and probably never been greased,so i thought i'd have a check of mine which has done 8500 miles and a Jan04 GS,i had even bigger surprise, two...
  4. F650 Single Discussion
    Ok is it just me but when I have the bmw bags on the rack and on the pillion seat, I find it difficult swinging my leg over when getting off the bike - managed to put a scartch on the paintwork with my boot! Will have to t-cut at the weekend....what's the best way to get on/off?
  5. F650 Single Discussion
    While replacing chain and sprockets on my '98 Strada, I decided to clean and re-grease the swinging arm pivot bearings and the suspension linkages. The nearside pivot bearing was found to be, as expected, a needle roller type, but the drive side bearing was a plain bush. Now the BMW workshop...
1-5 of 5 Results
Top