BMW F650 Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-7 of 7 Results
  1. F650 Single Discussion
    Hi I bought an F650GS a few weeks ago which is fitted with a Scott oiler. Can anyone tell me please where the best place to buy lubricant to refill the oiler or should I just send off to the manufacturer? I am in Brighton. Many thanks Bob
  2. F650 Single Discussion
    I'm a bit reluctant to drill into the manifold and fit the spiggot as suggested which makes me ask this question. Aren't there any breather pipes there with enough vacuum to activate the Scott Oiler? On lots of singles there are rubber pipes that you just cut and insert a 'T' piece. I have seen...
  3. F650 Single Discussion
    I have fitted a Scottolier to my Funduro and my 04 GS before and usually fitted it to the down tube of the frame to the ride side of the bike BUT cant do that with the Dakar Any ideas where I can fit it to my Dakar as upright as possible !?!?!?!?!?!? :not worthy: :help:
  4. F650 Single Discussion
    :wall: Hi! I currently have a Scott Oiler on my Funduro. Its mounted on the offside just under the lower faring panel ( the Y shaped grey plastic bit) I have just bought an 01 reg F650 GS and am about to mount a new Scott Oiler on that as well. The Scott oiler web site shows mounting it near...
  5. F650 Single Discussion
    I have just completed the very entertaining process of fitting the basic universal Scott Oiler kit to my F650. A couple of points may assist other readers. There is a model specific guide on the Scott Oiler site with photos. These should assist with mounting the oiler & tubing etc. I should...
  6. F650 Single Discussion
    I am about to place an order for a 2004 F650GS. My current bike is a R850R but after 7 years of use the F650GS just feels like more fun to be riding. Question : What automatic chain oiler alternatives are there to the Scott oiler. ? The reason I ask is drilling and glueing of the manifold...
  7. F650 Single Discussion
    Hi, you may remember that I recently posted a message re my "too enthusiastic SO". This is just a quick note to say thanks to everybody who replied but in particularly Mark McCallum (Technical support at Scottoiler Ltd). Mark suggested to send the RMV in to have it re-conditioned at a price...
1-7 of 7 Results