BMW F650 Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-6 of 6 Results
  1. F650 Single Discussion
    Hi, just thought I would ask to see if anyone could help me. Stripped the top end to as the engine was giving up and losing power, also oil light kept coming on and low on oil. This seemed to be ending up in the air filter box. After stripping the motor, oil was contaminated with water. This led...
  2. F650 Single Discussion
    My '98 funduro front caliper is binding ever so slightly(Mot failure) Ive stripped the caliper down cleaned all the faces,pins rubber sliders ,anti rattle shim etc etc but all to no avail. After looking for a seal kit at motoworks and 'Bins etc i have found that the caliper is a non servicable...
  3. F650 Single Discussion
    Has anyone out there managed to rebuild and reseal and original rear shock ? My original rear shock has already been rebuilt professionally and has now done about 45,000 miles but need a rebuild again but I don't want to spend another £150 so i want to do it myself. My problem is that I don't...
  4. F650 Single Discussion
    Some of you may have read about my water getting into the oil on my Funduro. After a can of 1664, I picked up enough courage to do the job myself. I earlier called BMW to ask them for a quote, but tomorrow when they call back I know that it's going to be ?500 at least for parts and labour. I...
  5. F650 Single Discussion
    Has anybody had their rear shock rebuilt or a heavier spring installed. As I'm of the F/b size I was thinking of the latter to start with. The bike is a Dakar by the way . Atb Billy
  6. F650 Single Discussion
    I've stripped down the carb on my F650, with the aid of the Clymer Manual and the f650.com FAQs. However, the main jet won't come out. Nor the slide (grey plastic thing). I have removed the threaded screw from the top of the jet. Should the main jet just fall out now? Help gratefully aqppreciated.
1-6 of 6 Results
Top