The left hand switch control on my Funduro is loose. I have tightened it as much as I can but its still loose. I have put some insulation tape under it to pack it out but this has not made much difference. If I put too much tape on I cannot get the thing back together, I think the body of the...
Hi, thanks for all the advice on my last post. My last question, hopefully for a while at least is this. My Funduro 2000 model is fitted with heated grips they appear to be retro fitted BMW ones. However when I put the bar ends on today from motor works the right hand one stops the throttle from...
I know this is a pinfully daft question.... but I'm after a cheap supplier of bar risers that will work on Rosie the Scarver.
After dropping her on the ice last year, and the year before Pidcocks KNACKERING up my heated grips in a repair and refusing to take any responsibility, I...
I have a 2001 gs dakar and plan to do quite a bit of riding through the winter.
Have you any of you fitted HANDLE BAR MUFFS?
Also have you been able to fit them over the OVER THE HAND GUARDS?
WHICH BRAND ARE YOU HAPPY WITH?
PROS AND CONS OF RIDING WITH THEM?
I know of OXFORD, TUCANO ETC...
Hi All. Thanks in advance.
I had had the Funduro 650 for a couple of years now. I have always had a lot of vibration up though the handle bars so much so it is difficult to see clearly in the mirrors. Is this usual for a F650?
Want to put some bar risers on the Dakar (05).
As I have the ABS and Hazard switches is there enough wiring in the loom for the extra lift or is there a bit of wiring involved and how bad is the fouling of the hand guards on the screen?
At 5' 11" is the 25mm enough or should I go for the 35mm...
i've got a set of 35mm risers on the way and i was wondering if anyone knows whether i need to replace any of my cables?
i'm getting a new braided brake line anyway so i'll probably just measure up for that and get it custom made. but does anyone know if i need to replace my throttel and clutch...
I need as set of bar risers/adapters so I can fit a set of renthal twinwalls on my dakar. They need to go from the standard 23mm (I think) to 11/8" to allow for the fatter bars. Anyone know hwere I an get some?
Looking for possible ways of carrying mobile phone without the need for a tank bag I saw the Lenkerboy handle bar bag on the Wunderlich, site has anyone any experience of this product? is it worth the money?
All comments welcome
Hello people, can anybody help? :think:
I have a pair of lights I want to fit the my other halfs 650gs (mini magnifiers about 3" across).
Has anyone any ideas about light bars or mounting plates etc.
Now for the difficult bit. I don't want to spend silly money as this bike WILL be getting...
:think: hello folks
I had a small fall of the bike some weeks ago, a truck pulled out in front of me result hand bars twisted got new one from motorbins great service, now the new handle bar is twisted slighly left on the steering clamps when steering is straight??. I drove the bike now it feels...
Howdo could someone with a Funduro tell me the diameter of the handlebar where it is clamped to the top yoke.
Im after some for my Strad and they measure 22.5mm or 7/8" if my conversions are right.
Thanks Dazco :not worthy:
After searching this and other Fora for information regarding an Auxilliary Light Bar for the F650GS I decided to take a more lateral approach to the problem. After dropping the upper mudguard, I bolted a piece of aluminium strip (385 x 25 x 5mm) to the underside of the black plastic headlight...
:dance: finaly i have sorted t renthals vibes tried a couple of diferent types of bar end weights :wall: :wall: and it was still uncomfrtable so after a good friend kas at speed style sugested lead i found some old led pipe in my cellar choped 5 inch for each side roled it up to fit and...
I've always been fed up with the way the paint on my bar ends gets chipped then rusts, then all falls off. The bike as a whole is no supermodel, I'll grant you, especially after a winter of filth and more filth, but the bar end thing just bugs me.
Anyone know where I can get a set of...